Commercial Fire Protection Service
Commercial Fire Sprinkler Repair
Fast, code-compliant repair addresses active deficiencies before they become a life-safety or compliance problem.
Overview
Repair addresses active deficiencies identified through inspection, testing, or an incident, such as a leaking valve, a damaged sprinkler head, corroded piping, or a failed alarm device.
Repairs should be performed by a qualified, often state-licensed, fire protection contractor, and depending on scope may require a local permit before work begins.
Common Repair Scenarios
- A leaking control valve, check valve, or pipe fitting
- A physically damaged or corroded sprinkler head
- Low or fluctuating system pressure at the gauge
- Piping damaged by impact, such as a forklift strike in a warehouse
- A failed tamper switch or waterflow switch that no longer reports correctly to the monitoring company
System Impairment Procedures
When a repair requires taking all or part of the system out of service, NFPA 25 calls for a formal impairment procedure. This typically includes tagging the affected valve, notifying the monitoring company, insurance carrier, and AHJ as applicable, and posting a temporary fire watch for the duration of the impairment.
Emergency vs. Scheduled Repair
An active leak or a fully impaired system generally calls for an emergency response to restore protection as quickly as possible. Less urgent deficiencies, such as a single damaged but still-functional component, can often be scheduled during a planned maintenance visit.
Frequently Asked Questions
Is a permit required for sprinkler repair?
It depends on the scope of work and local jurisdiction. Minor like-for-like component replacement often does not require a permit, while repairs involving piping modifications typically do. Your contractor can confirm local requirements.
What is a fire watch and when is it required?
A fire watch is a temporary, trained presence that monitors a building for fire risk while sprinkler protection is impaired. Many AHJs require one whenever a system, or a significant portion of it, is out of service for more than a specified period.
How quickly should a leak be repaired?
Active leaks should be addressed as soon as possible, both to restore full protection and to limit water damage. Most commercial fire protection contractors treat active leaks as emergency calls.
Request Commercial Fire Sprinkler Repair
Get connected with a contractor who can diagnose and repair your system quickly and correctly.